Five Common Sprinkler Problems and How to Fix Them

Active water water sprinkler

It is every homeowner’s dream to have a beautiful stretch of green landscape for a lawn. However, this requires effort and consistency, which cannot ultimately be attained if you have a faulty sprinkler system. And if left neglected, your once pristine and beautiful lawn will be riddled with brown spots, dry areas and dead grass.

There are three main parts in a sprinkler system that usually become problematic over time. These are the heads, lines and valves. Some problems also occur with the programmable control unit. However, these issues are usually caused by operator error rather than a malfunction in the system. Sometimes, these types of issues can be fixed by simply resetting the system.

But for other pressing concerns, a little tinkering might be necessary to make the system functioning properly again. You can either go the DIY route or hire sprinkler repair experts in Draper, Utah. The following are some common problems that people encounter with their sprinkler system, as well as how to quickly repair them once detected.

Blocked or Clogged Heads

Sometimes, there might be obstacles such as walls, lawn accessories, fences and grass overgrowth that can hinder your sprinkler heads from fully functioning. You can solve this by simply clearing out the area near the heads or repositioning them entirely away from any obstacle.

Broken Sprinkler Heads

Over time, it is inevitable that sprinkler heads break down and deteriorate. This can cause many problems ranging from leaks and system malfunction. Luckily, this problem can be quickly fixed by replacing the sprinkler head. Just remember to replace it with the same type and model to prevent any issue in the future.

Check Valve Issues

Check valves, in general, are placed in many irrigation systems to prevent leakage. However, there are instances wherein sprinkler systems suffer from a faulty check valve that usually results into water leaking from the system. When you have detected that your check valve is malfunctioning, it is high time that you replace the sprinkler head of the component in question.

Low Water Pressure Output

If you notice that your sprinkler heads do not pop up when activated like they usually do, this is a sign that your sprinkler system is suffering from low water pressure. If this is not a problem caused by your waterways, it usually means that your system has a poorly designed layout.

Unfortunately, the only way to fix it is by calling in a reputable sprinkler repair service provider to inspect your system and make the necessary adjustments.


Installing a water sprinkler

In general, leaks are problems that may have different causes. A leak can be caused by a broken sprinkler head, a faulty check valve, or even mechanical damage. If you are experiencing a leak, you can try to replace the sprinkler head to fix it.

However, if the problem persists, you may have to ask for professional help since this usually means that the problem is more complicated than it seems.

While problems with your sprinkler system can usually be repaired through simple means, keep in mind that there is only so much you can do especially if you have no prior experience in fixing these types of equipment. It is important that you should also be open to asking help from experts when necessary.

Scroll to Top